Design quick tips

Bleed, safe area and trim

The printing process isn’t perfect, so to make sure your cards come out looking the best they can there are a few guidelines to follow. What we’re talking about are the Safe Area, Bleed, and Trim.

While these sound like complex (and painful) print terms, but they are actually quite simple once you get to know them.

Safe Area

This is an area within the trim where any text, important parts of photos, logos, and other critical parts of your design should be kept, otherwise it may get cut off.
Trim The final size of your cards is referred to as the trim size. This is where we aim to cut your cards.
Bleed This is the area outside of the trim line that will get cut off, and while it ultimately gets removed it’s still important to the overall production of your product.
Tip: Looking for design templates with exact sizes? Click here to get yours for Illustrator, Photoshop, and more.


Whether you’re using a photo or a solid color, you’ll want to make sure that the background of your design extends through and fills the bleed area. This makes sure that your design reaches all the way to the end of the card when trimmed and will prevent any ugly white edges.

Tip: Sometimes bleed issues like to hide in the pink area, so make sure to review your PDF Proof closely
When using photos you’ll want to make sure there is plenty of extra space around the focal point of the image, so the unimportant part of the photo can fill the bleed area and the important part is in the safe area. We don’t want anyone’s head to get cut off.

Safe area 

To keep all of the important stuff on your cards, not the cutting room floor, you’ll need to make sure all essential text and parts of images are kept within the safe area. The safe area is placed far from the trim line, but if something were to sneak outside of the safe area it wouldn’t be protected from the big, bad blades of our cutting machines.. We also recommend providing a little extra room for your design to breath inside the safe area, just in case. 

Border recommendations 

In general we suggest avoiding borders, as they can come out lopsided or uneven. Although if you want to use a border, we recommend extending it at least 2mm within the safe area. This is to make sure that any inaccuracy during the cutting process is less noticeable. 

Was this article helpful? 15 out of 27 found this helpful 27